The electroluminescent light source is shadowless and homogeneous and can be shaped to fit small and/or complex spaces. EL panels can be thin as paper and bendable, which allows them to be framed, installed on curved surfaces, or even to be wearable. It requires no light box but a small power supply. The low power consumption makes EL technology one of the most energy efficient light sources available.
Seeing is Believing
Printing an image over the light will produce a backlit sign. Applying an animation makes it very effective and visually striking. Furthermore those images can be programmed to be illuminated in a sequence to create an effect of movement.
Using this technology we produce a dazzling lighting effect on a wide range of media, animated designs and programmable patterns.
Luma Strike Animated Panels – EL
The panels are flexible, flat, thin, neon look alike light sources that can be cut into complex shapes. The EL panel is essentially a capacitor structure with phosphor sandwiched between two electrodes. Application of an AC voltage between the electrodes generates a changing field within the phosphor which causes the phosphor to emit light.
EL panels are impact and vibration resistant, require low power, generate low heat during operation and are manufactured using a cost effective silk screen printing process. The technology is not new but still not easy to create or reproduce. Electroluminescent lighting is an amazingly thin, captivating light source that is revolutionizing the way businesses market their branded message to target audiences. Any artwork supplied can be animated to light as per your specifications. All Luma Strike products can be customized to illuminate in any size, shape, color or animated sequence.
Our panels are usually powered by an AC or DC power supply, which differs, based upon the size and illuminated area. Batteries could also be used, in which case we can prolong the life of the batteries by using a motion sensor, timer, solar panels or any other different detectors.
This technology is set to take over back lit posters among a host of other light source based products that are energy inefficient, expensive and bulky. The potential of this product is immense across a wide range of applications.
|LONGEVITY||30,000 Hours depending on the lamps environment, driving condition and duty cycle.|
|WARRANTY||6 months factory warranty for all electroluminescent panels and inverters.|
|SIGN MATERIAL||Multi-laminate construction.|
|SIZES & SHAPES||Custom shapes available. Any size can be achieved by joining panels together.|
|APPLIED VOLTAGE||AC 50 Vrms to AC 220Vrms (for split-electro up to 350vac)|
|APPLIED FREQUENCY||50 HZ to 3 KHZ|
|INDOOR/OUTDOOR||Can operate in both environments.|
|PANEL OPERATING TEMPERATURE||−20° ~50° (Nor.) / 70° (max)|
|PANEL STORAGE TEMPERATURE||−40°C to +70°C|
|PANEL OPERATING HUMIDITY||0% ~ 90%|
|OPERATING CURRENT (100vrms/400Hz)||1.5~2.5 mA/in²|
|OPERATING POWER||Low power consumption. Approx 5-10 watts.|
|POWER RESOURCES||DC 1.5V to 24V and or AC110/220V|
|POWER INVERTER||Different power configurations to optimize sign parameters.|
|CAPACITANCE||2 - 5 nF/in²|
|THICKNESS||0.2~0.4mm (min 0.119mm for 2nd-generation foil)|
|PANEL WEIGHT||A typical display with size of 152mm x 305mm weighs ~284g.|
|SAFETY||No ultraviolet radiation emitted.|
|BEND RADIUS||0.25" – normal 2nd-generation foil – foldable.|
|NORMAL EDGE SEAL||0.08"(2mm)|
|MIN. EDGE SEAL||0.03"(0.76mm)|
|LEAD PULLING||0.5kg 10sec.|
|LEAD BENDING||90° 250gr bending 2 times|
|SOLDERING HEAT RESISTANCE||250 degrees 3sec>3mm distance from EL panel with extra force applied.|
|TESTING||Environmental, storage & temperature shock tests|
|CERTIFICATIONS||All certifications for electroluminescent panels and inverters are available upon request.|